I know they're SMU for Marco Sturm but that's all I really know. I picked up 4 but have no idea what they're similar to stick-wise.
Warrior The Cutman sticks
Started by miscs75, May 12 2015 02:22 PM
11 replies to this topic
#2
Posted 12 May 2015 - 04:06 PM
Follow us:
Instagram: http://instagram.com/sports2k_com#
Facebook: https://www.facebook.com/pages/Pro-Stock-Hockey-Sports2Kcom/151010068304116
Facebook: https://www.facebook.com/pages/Pro-Stock-Hockey-Sports2Kcom/151010068304116
#3
Posted 12 May 2015 - 05:12 PM
I had pro Hitman sticks for C Bourque that were basically just Dolomites with paintjobs. Sturms may be standard not tapered
Good Idea; Whistling while you work.
Bad Idea; Whistling while you eat.
#4
Posted 13 May 2015 - 06:16 PM
They're standard hosel one pieces, I know that but I'm not sure of anything else. I have 4 currently and can post pics later today if it helps.
#5
Posted 13 May 2015 - 06:18 PM
If they're the SMU I'm pretty sure they're repainted Hitmans. If they were his actual pro sticks they'd be Dolomites.
#6
Posted 13 May 2015 - 06:21 PM
they are his actual pro stocks. The pattern is almost identical to the Easton Heatley curve. I'm curious of the rest of the specs, specifically what the flex actually is.If they're the SMU I'm pretty sure they're repainted Hitmans. If they were his actual pro sticks they'd be Dolomites.
#8
Posted 13 May 2015 - 06:52 PM
Link doesn't work for me, but Flex and weight should be listed like any other Warrior. Otherwise check inside the butt end for markings
Good Idea; Whistling while you work.
Bad Idea; Whistling while you eat.
#11
Posted 13 May 2015 - 07:12 PM
235 is the flex, 95ish. If it's standard, it's essentially an "AK27" standard shaft with fused blade. But a pro guys specs from there could be a wide range "C5S" I believe is the blade construction, and assume S is for Standard.
Good Idea; Whistling while you work.
Bad Idea; Whistling while you eat.
#12
Posted 13 May 2015 - 07:46 PM
235 is the flex, 95ish. If it's standard, it's essentially an "AK27" standard shaft with fused blade. But a pro guys specs from there could be a wide range "C5S" I believe is the blade construction, and assume S is for Standard.
Spot on translation of the old Innovative specs. Marc Savard also used the 'Cutman' graphics for a bit too.
