Jump to content


Photo

Review: Easton Pro+ Custom Gloves (2015)

easton gloves custom

  • Please log in to reply
30 replies to this topic

#1 Lemieux

Lemieux

Posted 04 August 2015 - 07:18 PM

(This is a cross-post from a review I posted on ModSquadHockey. Just wanted to share on Sports2K because I learned a lot from this forum, too!)

 

BACKGROUND
 
Four-roll gloves are classic - both in terms of ft and look - and I always thought that the coolest model was by Easton. I’ll have to admit - I wanted to look like an NHLer (that’s why forums like this exist, isn’t it?!), and it seemed like everyone wore these gloves. (Kudos to Easton’s pro and marketing departments for making that impression!)
 
In particular, Easton has had good representation on my home team, the Edmonton Oilers, particularly during the 2006 Stanley Cup run: Hemsky, Horcoff, Stoll, Torres, Staios. (And some of them rocked white fingers on their gloves, too!)
 

Hemsky%202006%20playoffs_zpsrhpd93bb.jpg

Look at all the Easton gloves!

 

Horcoff%20triple%20OT%20goal_zpshyaiibdt

Shawn Horcoff, who was a beast in 2005-2006scored a triple-OT winner in his sweet Easton gloves.

 
I’ve been dreaming up custom Easton gloves as far back as 2011 when Pro Stock Hockey Gear announced a program called “The Works”. Unfortunately, that option closed before I was in a position to place an order (Easton closed their Canadian factory), so I thought that my dream glove would never materialize. (The PSHG would taunt me for my missed opportunity with photo galleries for the Works, the Synergy 800, and the EQ50.)

 

Easton%20Synergy%20800%20CL%20mockup_zps

One of the many mock-ups I made on PSHG’s customizers.

 
But news of custom Easton gloves renewed my interest, so when I was in British Columbia this year, I had to stop at The Hockey Shop in Surrey. Once I slipped my hand into the new 2015 Pro+ glove, I was hooked. And after chatting with the internet-famous Jesse and talking gear with him, my mind was made up.
 

Easton%20Pro%20Narrow%20NHL_zpstsymg7yp.

This is the glove that set me on my path towards this custom order.

 



#2 Lemieux

Lemieux

Posted 04 August 2015 - 07:19 PM

SPECS
 
Model: Pro+
Fit: Narrow
Size: 14” -1/2" cuff
 
Foam: EVA dual density
PE insert: 1.5 mm
Thumb: flex
 
Palm: Pittard digital 0.85 mm
Overlay: Pittard digital 0.85 mm
Gusset: Poly knit black (stretch)
 
Palm fit: standard
Finger length: standard
Gusset height: -1/4"
Cuff length: -1/2"
 
Embroidery: CHRISLE9
Pinky side: LET’S DO THIS!
 

DSC_5666_zpsp2mr7rgc.jpg

Easton Pro+ glove, front and side.

 

DSC_5675_zps3zxyep7c.jpg

Easton Pro+ glove, back.

 
FIT

 
My first impression was very positive when I slipped on the narrow version of the Pro+ gloves. It was my preferred fit: narrow without being tight. For years, Easton’s finger length would be too short or too long for me, but this version of the glove had finger lengths that fit me perfectly. Nice!
 

DSC_5677_zpsxu2blz9v.jpg

Easton Pro+ glove, 14”, narrow fit.

 
I am very fortunate that I was able to try the glove in person and make personalized tweaks. The Hockey Shop had the four variations of the Pro+ glove: standard, narrow, wide, and short.
 

Easton%20Pro_zpsze2n1snq.jpg

Pro+ glove in wide (orange), short (baby blue), standard (gray), narrow (gold).

 
The order form illustrated the fit options:
 

Easton%20Pro%20fit%20options_zpsxur2ebdd

Cuff length, finger length, palm fit, gusset height.

 
I opted to decrease the gusset height by 1/4". That eliminates excess material. This feature is on another pro glove that I own, and I knew that I liked the more responsive feel in my fingers. Seems to be a popular option nowadays, especially for those who are repalming their gloves.
 

DSC_5679_zpsfkclbu8p.jpg

Finger gussets, -1/4" height.

 
Short cuffs look cool. Easy as that! Options were to go +1/2" or -1/2". I’m not concerned about slashes to my wrist, so no need to be like Zach Parise.
 

DSC_5689_zpsrgwqzy3f.jpg

Cuff, -1/4".

 
Palm fit could go +1/4" or -1/4". Finger length could go +1/4" or -1/4". I went standard for both of these options. Again, it was nice to try on the glove in person and decide whether or not I wanted to change these options.
 
PROTECTION
 
Since I don’t play in a competitive league, I did not maximize the protection options. Standard features were good enough for me.
 
Easton describes the “EVA dual density” option as “lightweight + comfortable”. The other main option was “EPP”: “lightweight + protective”. These two options are chosen pretty equally, so it came down to personal preference.
 
The PE insert comes as 1.5 mm (standard), which works out to be ~60 g, or 2.0 mm, which is 80 g. It’s possible to order without the PE inserts, too.
 
The hockey glove thumb is designed around an important feature: preventing hyperextension (i.e. pulling it back too far). That’s why gloves usually brag about their “lock thumb”. Flexing the thumb, on the other hand, is a specific feature that requires extra parts for flexing and preventing hyperextension. I’m not sure that I involve my thumb as much as I think I do, but I like the idea of flexing the thumb when I want to, so that’s why I chose that option.
 

DSC_5695_zps06m8sbmp.jpg

Flex thumb, unflexed.

 

DSC_5696_zpsmynnnqhj.jpg

Flex thumb, flexed.

 
WEIGHT
 

A single glove weighed 380 g (or 13.4 oz) on the scale I used. There’s a good heft to them.

 

For the sake of comparison, Total Hockey’s website lists the weights for other comparable four-roll 14” gloves: the Bauer Nexus 1000 is 326 g (11.5 oz) and the Warrior Dynasty AX1 is 300 g (10.6 oz).

 
DURABILITY
 
The glove shell is made with “ProLite Tex”, which Easton describes as a “lightweight and durable knit fabric shell”. (There was not an option for a synthetic leather, which would have been nice for the white sections.) It holds up well enough, presumably, as these gloves are the same ones as pro orders.
 
The palms are Pittard digital palms. It’s a popular pro option because it’s thin and grippy. It’s marketed as a performance product, so users need to be aware that it may wear out more quickly than other materials. For the overlay, which goes across the palmar creases of the palm, I chose to go with the digital material.
 

DSC_5688_zpscxa3ppzf.jpg

Digital palm with digital overlay.

 
For all of the talk about feel, this palm feels thicker than I expected! It’s listed as 0.85 mm on the form. Maybe I need to break in the palms a bit more to get a better assessment of it. Maybe I could’ve gone without the overlay.
 
Other options from Easton included Ax Suede white (0.75 mm, found on their retail 2015 Synergy glove), Velukid brown (0.8 mm, a microsuede material that they call “Tactik” on their retail 2015 Stealth glove), Apco beige (0.8 mm, a “very soft beige microsuede material with lots of usage in the NHL but not the most durable”), Apco grey (1.0 mm), Nash beige (1.0 mm), and Nash sure grip. I believe that the retail Pro 10 glove has grey Nash with a Nash sure grip overlay.
 
The gussets (the space between the palm and the foam padding) are black stretch poly knit. Many people opt for mesh gussets for improved ventilation, but I get the sense that mesh gets chewed up pretty fast. I think that the poly knit will do just fine, and, in fact, it’s a common option on pro and high-end retail gloves. The gussets usually match the palm material, but Easton doesn’t do digital gussets because of durability issues.
 

DSC_5679_zpsfkclbu8p.jpg

Black stretch poly knit gussets, -1/4" height.

 
One option intrigued me: a hybrid gusset! It starts with either a poly knit or mesh gusset at the base of the fingers, but the fingertips are covered with the palm material. You actually see it on the retail Pro 10 glove, and it’s also seen on other retail gloves. (Look for it!) I ultimately didn’t go for it because I’ll want to repalm my gloves eventually and don’t want them to be unnecessarily complicated for the repair job.
 

easton%20pro%20finger%20tips_zpsvxbnl2se

Retail Easton Pro 10 glove, with hybrid gussets. Look closely between the fingers next time... (Photo credit: Total Hockey)

 
Speaking of repalming, when it happens, I’m going with Pat Rivest at Custom Pro Repair. He used to work for Warrior before the Montreal factory closed down, so now he’s opened up a shop. He was their main pro glove person, so he’s as good as you can get for getting a factory-level job. Check out his work on his Facebook page or the Sports 2K thread.
 



#3 Lemieux

Lemieux

Posted 04 August 2015 - 07:19 PM

COLORS
 
Honestly, being able to have custom colors was the tipping point for making the order. My favorite team glove is the Washington Capitals, such as the Warrior Luxe and the CCM CL, and so I put them into Edmonton Oilers colors with a few tweaks.
 
Some design elements include a white cuff roll (like Jacks 97), white side block (like with the Lighting (classic) and the Devils), bright cuff+flare cuff that contrasts with the back rolls (like Eagle PPF in “design 7” or Jurinko’s Warrior gloves), and outline logo (something that I really liked from classic Eagle gloves). The outline logo is the same thing that I did on my goalie equipment, so there’s that continuity with my custom gear!
 

DSC_5709_zps6g4twcge.jpg

Contrasting colors to make a statement!

 
One small change that I’d consider is adjusting the binding at different locations. Check out the binding on the retro Calgary gloves: yellow with red cuff, but red with red backrolls.
 
EMBROIDERY
 
There’s the standard embroidery on the cuff and an additional spot on the pinky side padding. “Let’s do this!” is a personal slogan that I’ve added to other custom gear, like my catcher and my mask. There’s an option to add a team logo, and Easton accepted my personal “rice man” logo!
 

DSC_5669_zpstaaelmsk.jpg

CHRISLE9.

 

DSC_5673_zpsbdmzk5tb.jpg

LET’S DO THIS!

 

DSC_5672_zpsqya9gv6n.jpg

“Rice man” logo.

 
ORDERING
 
It feels like the current go-to person for custom hockey gloves is Jesse from The Hockey Shop. He’s done a lot of custom work, especially with Eagle, so his reputation preceded him when I stopped in the store. His industry knowledge, coupled with a personable attitude and professional work ethic, made for an easy process. He answered emails in a timely manner, and he always looked for answers to anything he didn’t know. He was clear to outline what he could and couldn’t deliver, and I appreciated the honesty. I’d be happy to recommend him and direct people to his services.
 
After all the details were in, Easton created a mock-up that required my approval. Once done, the order was in! The factory is in China, and took about three weeks for production and 1 week to ship to me in Canada. Very smooth transaction.
 

Easton%20Pro%20CL%20mockup_zpssjchocse.j

Easton’s mockup.

 
CONCLUSION
 
I’m very happy that the option for a custom Easton glove is available to the public, and they’ve delivered very well on making the glove to my specifications. I can’t wait to hit the ice with them! I plan to provide an update about on-ice performance once the season starts up.
 
The ordering process was great with Jesse from The Hockey Shop. A look at his track record reflects his commitment to customer service, and I recommend him for custom work.



#4 Oey444

Oey444
  • LocationWinnipeg

Posted 04 August 2015 - 10:32 PM

Saw these on MSH, but I don't have an account on there.

 

These gloves are unreal man! Great write-up as well. I'm seriously considering to my local Source for Sports and seeing if they'd do this!


Go Sens Go!

Go Jets Go!

 

Always interested in any Sens gear.

LF: Spezza Luxes/Coverts, Kovy Luxes, EK65 Coverts, EK65 gear in general


#5 crabby

crabby
  • LocationAustria

Posted 05 August 2015 - 06:28 AM

What's the price like for Easton customs??
LF
CCM TACKS 80 flex LH Kreps
Purple or green gloves
purple practice jersey

#6 hockeymutt

hockeymutt

Posted 05 August 2015 - 12:26 PM

Around 250 shipped

#7 crabby

crabby
  • LocationAustria

Posted 05 August 2015 - 01:32 PM

Cad or usd??
LF
CCM TACKS 80 flex LH Kreps
Purple or green gloves
purple practice jersey

#8 hockeymutt

hockeymutt

Posted 05 August 2015 - 01:57 PM

Cad or usd??


Usd

#9 Mapleleafs-13

Mapleleafs-13
  • LocationToronto

Posted 05 August 2015 - 02:29 PM

Very interesting post. Well organized.

Rice man logo is epic

Looking for BIOSTEEL jersey made by UA or Adidas.

Looking for Bauer Pro defender elbows size Large

 

My ebay (better prices for members)


#10 Mincy

Mincy
  • LocationGreensboro, NC

Posted 05 August 2015 - 07:58 PM

Beautiful mitts, love the specs!

"Speak softly and carry a big stick"  Feedback


#11 qmc93

qmc93

Posted 05 August 2015 - 09:15 PM

Very very nice gloves. What does Easton offer in terms of glove materials (i.e. tufftek, leather, carbon etc.)?

#12 Lemieux

Lemieux

Posted 07 August 2015 - 04:09 PM

Very very nice gloves. What does Easton offer in terms of glove materials (i.e. tufftek, leather, carbon etc.)?

The only option was to use their stock "tufftek" equivalent. There are two types of material for the shell, though I do not know the difference between them. I wanted some type of leather, especially for the white portions, but it was not available to me.



#13 Sin.ce1977

Sin.ce1977
  • LocationCentral Jersey

Posted 05 October 2015 - 01:26 PM

Not sure if this is the spot for this.

 

Not that I could have.

 

Not that I should have.

 

But after reading all of the above... I had to have...

 

20151005_140605.jpg

 

20151005_140627.jpg

 

20151005_140703.jpg

 

e2b9c54f-08c6-440f-a322-8281f67b0499.jpg



#14 JTully317

JTully317
  • LocationMassachusetts

Posted 05 October 2015 - 11:23 PM

Great looking mitts. I wish Dallas would adopt a similar colorway to their gloves.

#15 Firebrand

Firebrand

Posted 10 October 2015 - 07:53 PM

Forgive me for asking, but I'd been kicking around the idea of getting custom Easton gloves for quite some time.  Only trouble is, I recently tried on a pair of the new Stealths and I love them more than any Easton glove that came before them.  I don't suppose you're able to customize a pair of those, are you?  They'd be an automatic buy.



#16 hockeymutt

hockeymutt

Posted 10 October 2015 - 11:44 PM

yes you can think you can do almost any glove 



#17 Lemieux

Lemieux

Posted 15 October 2015 - 07:50 PM

Forgive me for asking, but I'd been kicking around the idea of getting custom Easton gloves for quite some time.  Only trouble is, I recently tried on a pair of the new Stealths and I love them more than any Easton glove that came before them.  I don't suppose you're able to customize a pair of those, are you?  They'd be an automatic buy.

Yep, the Pro, Stealth, and Synergy are all available on the custom order form!

#18 Lemieux

Lemieux

Posted 15 October 2015 - 07:51 PM

Not sure if this is the spot for this.
 
Not that I could have.
 
Not that I should have.
 
But after reading all of the above... I had to have...

What are your specs?

#19 Sin.ce1977

Sin.ce1977
  • LocationCentral Jersey

Posted 15 October 2015 - 08:00 PM

What are your specs?

Model: Pro+
Fit: Narrow/short
Size: 13” -1/2" cuff
 
Foam: EVA dual density
PE insert: 2.0 mm
Thumb: flex
 
Palm: Pittard digital 0.85 mm
Overlay: Pittard digital 0.85 mm
Gusset: Poly knit black (stretch)
 
Palm fit: standard
Finger length: standard
Gusset height: -1/4"
Cuff length: -1/2"
 
Embroidery: SPUTNIK20
Pinky side: (left) Lucia (right) Sofia
No "Screaming E" on cuff roll
 
"Lubo" fingers and finger tip inserts on the left hand but not the right


#20 crabby

crabby
  • LocationAustria

Posted 21 October 2015 - 01:21 PM


Model: Pro+
Fit: Narrow/short
Size: 13” -1/2" cuff

Foam: EVA dual density
PE insert: 2.0 mm
Thumb: flex

Palm: Pittard digital 0.85 mm
Overlay: Pittard digital 0.85 mm
Gusset: Poly knit black (stretch)

Palm fit: standard
Finger length: standard
Gusset height: -1/4"
Cuff length: -1/2"

Embroidery: SPUTNIK20
Pinky side: (left) Lucia (right) Sofia

No "Screaming E" on cuff roll


"Lubo" fingers and finger tip inserts on the left hand but not the right


What are the "Lubo" fingers for?? More protection? How does it work?? Are you left or right handed??
LF
CCM TACKS 80 flex LH Kreps
Purple or green gloves
purple practice jersey





Also tagged with one or more of these keywords: easton, gloves, custom