What is the fit difference? I am currently using x100 and I'm thinking about switching to CCM Tacks... I heard that the are extremely moldable too...
Bauer Vapor fit vs CCM Tacks?
Started by NSolo, Sep 12 2015 08:37 PM
5 replies to this topic
#2
Posted 13 September 2015 - 09:38 AM
Tacks are going to fit more like a Nexus boot. If you're in Vapors, and want to try CCM check out the Ribcore line.
#4
Posted 13 September 2015 - 09:33 PM
Also the new jets are supposed to be close to a vapor feel.
Nope. Having demoed the jetspeeds and tried on the ribcor, the ribcor are closer to vapor fit. IMO, CCM seems to run about a .5 size larger than Bauer. I fit in a 6 supreme, but had to go down to 5.5 in jetspeed.
#5
Posted 13 September 2015 - 11:14 PM
Very different. Tacks will be deeper, wider and don't open up in the forefoot like Vapors. Jetspeeds although have a tight heel, are much deeper than Vapors. Your Ribcores are going to be closest if you wanted a similar fit as stated above.
Also, all your CCM skates you'll be taking a size to .5 size down because of the heel pocket.
#6
Posted 26 September 2015 - 03:38 PM
Very different. Tacks will be deeper, wider and don't open up in the forefoot like Vapors. Jetspeeds although have a tight heel, are much deeper than Vapors. Your Ribcores are going to be closest if you wanted a similar fit as stated above.
Also, all your CCM skates you'll be taking a size to .5 size down because of the heel pocket.
Would the tacks be much different than vapors in a EE?
