Jump to content


Photo

Do CCM Shells work with Warrior girdles?


  • Please log in to reply
4 replies to this topic

#1 Jcantrell16

Jcantrell16
  • LocationNevada

Posted 04 August 2017 - 11:10 AM

I am curious to know if CCM shells work with Warrior girdles. Finally purchased a PP90 shell and I've head they only work with the 9k girdle. Would like to know if the PP90 shell is compatible with any girdle.

 

thanks,

 

 



#2 NovaHands

NovaHands
  • LocationBoston, MA

Posted 04 August 2017 - 12:13 PM

Depends on what you mean by "work."  If you want all the loops to line up, that might not happen.  But as far as it fitting and staying on just fine, you shouldn't have an issue.  I use PP90k's exclusively, and on a Bauer Total One girdle.  I have zero issues with that setup.  One of my shells doesn't even have a belt on it, and it still doesn't move once I fasten the velcro.

 

Where you might run into an issue is if you have something like an XL shell over a medium girdle.  Even then, the belt will keep it up.  It'll just be loose.



#3 Jcantrell16

Jcantrell16
  • LocationNevada

Posted 04 August 2017 - 12:40 PM

I have a large girdle, bought a large shell. Was just curious on how it would fit, also curious with the velcro loop positioning. Thanks for the info.



#4 Xtra

Xtra
  • LocationUnited States

Posted 04 August 2017 - 01:16 PM

Hey J,

 

They work.

 

I have a warrior Dynasty Girdle in a size large and have used CCM PP90's in a medium and large.

 

From my own experience, the mediums had the velcro tabs line up with the loops on the Dynasty girdle without issue. I felt that the legs on the medium PP90 ran too tight on the Dynasty girdle and would ride up the Dynasty padding when in skating position and kinda just get stuck... I'd have to pull the legs back down after a shift.

 

The large PP90 was nice and roomy in the legs and had the velcro tabs lined up just fine on the Dynasty. They came down way too far on my leg though so I had to get the shell trimmed down by an inch or two at the legs.

 

I guess it also depends on your height and body type. But the velcro tabs on both PP90's matched up just fine with the Dynasty's loops for me.



#5 Jcantrell16

Jcantrell16
  • LocationNevada

Posted 04 August 2017 - 01:23 PM

Hey J,

 

They work.

 

I have a warrior Dynasty Girdle in a size large and have used CCM PP90's in a medium and large.

 

From my own experience, the mediums had the velcro tabs line up with the loops on the Dynasty girdle without issue. I felt that the legs on the medium PP90 ran too tight on the Dynasty girdle and would ride up the Dynasty padding when in skating position and kinda just get stuck... I'd have to pull them down. on the legs after a shift.

 

The large PP90 was nice and roomy in the legs and had the velcro tabs lined up just fine on the Dynasty. They came down way too far on my leg though so I had to get the shell trimmed down by an inch or two at the legs.

 

I guess it also depends on your height and body type. But the velcro tabs on both PP90's matched up just fine with the Dynasty's loops for me.

Thanks for the info!