Jump to content


Photo

SB 4.0 holder/runner size confusion


  • Please log in to reply
11 replies to this topic

#1 DeweysDoughnuts

DeweysDoughnuts
  • LocationSoCal

Posted 16 April 2018 - 10:05 PM

So I wear a 7.5D FT1 skate, which from everything i've seen should be a 271 holder....however mine have a 263 holder which I only noticed after buying new steel for them...anyone seen this and have any insight on whats going on with this? It's a retail skate, purchased brand new

 



#2 dimpled

dimpled
  • LocationMaryland

Posted 16 April 2018 - 10:12 PM

That doesn't seem to be the case according to icewarehouse:

 

https://www.icewareh...cpage-CSBH.html

 

7.5 holders use 263 steel on there. 



#3 DeweysDoughnuts

DeweysDoughnuts
  • LocationSoCal

Posted 16 April 2018 - 10:18 PM

good find....the charts I saw on hockey monkey, giant, and pure hockey had a diff size chart

 

looks like CCM made a change for the newer model jet speeds and skate over all



#4 blazer88

blazer88
  • Locationlong island n.y

Posted 16 April 2018 - 10:38 PM

My 2016 7.5D  ultra tacks had the SB 4.0 holder / runner , size 263. I upgraded to a tuuk edge holder size 272 ( you can go up a size ). had a pair of 2014 7.5D  Tacks , that came with size 271 holder.



#5 Davekind

Davekind

Posted 01 June 2018 - 08:49 PM

@blazer88-did you have to drill new holes when you went up a size to the 272?

#6 Davekind

Davekind

Posted 02 June 2018 - 02:08 AM

My 2016 7.5D ultra tacks had the SB 4.0 holder / runner , size 263. I upgraded to a tuuk edge holder size 272 ( you can go up a size ). had a pair of 2014 7.5D Tacks , that came with size 271 holder.



#7 Davekind

Davekind

Posted 02 June 2018 - 02:09 AM

My 2016 7.5D ultra tacks had the SB 4.0 holder / runner , size 263. I upgraded to a tuuk edge holder size 272 ( you can go up a size ). had a pair of 2014 7.5D Tacks , that came with size 271 holder.



#8 Davekind

Davekind

Posted 02 June 2018 - 02:09 AM

@blazer88-did you have to drill new holes when you went up a size to the 272?

#9 Davekind

Davekind

Posted 02 June 2018 - 02:09 AM

My 2016 7.5D ultra tacks had the SB 4.0 holder / runner , size 263. I upgraded to a tuuk edge holder size 272 ( you can go up a size ). had a pair of 2014 7.5D Tacks , that came with size 271 holder.



#10 blazer88

blazer88
  • Locationlong island n.y

Posted 02 June 2018 - 09:52 AM

I did did not notice that my 2016 ultra tacks 7.5D had 263 SB holders till after I bought the 272 tuuk edge holders  ( my 2014 tacks 7.5D had size 271 ) & brought them to my skate guy. I did hear on here , that you can go up a size. the guy working at the skate shop said , he didn't install holders , but the guy that did would be in soon. left the skates // holders there & he said they would call me if there was a problem . got a call 2 hr's later , skates were done , no problem. didn't ask if he had to drill new holes. Worked great. should not be a problem.



#11 iceman8310

iceman8310
  • LocationMassachusetts

Posted 10 June 2018 - 04:09 PM

The sizing changed on the skates. A ccm 9.5 U+ or reebok 30k 9.5 is now a 10

#12 iceman8310

iceman8310
  • LocationMassachusetts

Posted 10 June 2018 - 04:09 PM

*20