Jump to content


Photo

Concept 3 faceshield on Warrior Helmet


  • Please log in to reply
6 replies to this topic

#1 Maratanator11

Maratanator11
  • LocationNew Jersey

Posted 02 June 2018 - 11:27 AM

Anyone have any luck with this? The front holes in the Warrior PX2 helmet are too wide for the concept 3 shield. Has anyone figured out a way to get it to fit? I have it on a bauer bucket now, but that helmet is on its way out (padding coming out, glue getting everywhere).

#2 x-axis

x-axis
  • LocationCalifornia

Posted 02 June 2018 - 11:55 AM

To my knowledge, no cages or full shields fit warrior helmets other than the Warrior cages because they are so wide. Have tried this with multiple cages at my old shop. You might possibly try the new Avisions or send them an email.


Old Buyer/Seller Feedback-http://www.sports2k....axis/?hl=x-axis

 

Want to buy:

Small Shells

 

Large Edge Practice Socks White with navy stripe 

Large Edge Practice Socks Burgundy with white stripe 

 

 

 

 


#3 KidCoyote

KidCoyote
  • LocationBrantford, ON

Posted 02 June 2018 - 08:27 PM

It fits. A bunch of guys on the Harvard hockey team rock that setup. My advice is to screw in one side at medium tightness and then stretch the other side over to line up with the other hole.

#4 60PlusWinger

60PlusWinger

Posted 03 June 2018 - 09:06 AM

All you have to do is modify the clips themselves and or possibly flip them. The newest generation concept 3 on a V08 wouldn’t fit but you cut the clips so they can slide wider and it works.

#5 Adam

Adam

Posted 07 June 2018 - 07:48 AM

or switch out the clips for the little metal ones, makes life way easier

#6 nicnok

nicnok
  • LocationAnn Arbor, MI

Posted 11 June 2018 - 07:40 AM

I trimmed my clips. Now it'll fit on any helmet.

 

http://modsquadhocke...auer-concept-3/



#7 Maratanator11

Maratanator11
  • LocationNew Jersey

Posted 13 June 2018 - 02:55 PM

I trimmed my clips. Now it'll fit on any helmet.

 

http://modsquadhocke...auer-concept-3/

 

That's a great fix.  I actually took the saw off a hacksaw and cut into the cage itself... the part the clips sit into. So I kinda dug a deeper groove into there and got it to fit.  Still haven't used it though lol.