Home Glove Repair
Started by Yetso, Jun 17 2012 05:16 PM
6 replies to this topic
#1
Posted 17 June 2012 - 05:16 PM
Wasn't sure where to put this, so I made a topic.
I recently bought a kind of beat pair of CLs from DField, I spent a few hours today making them workable.
BEFORE:
AFTER:
Just a bunch of sewing, cut up the palms of an old ass pair of Mission fuel 60's I had lying around and double layers them to patch it up, ran out of time otherwise I would have sewn up all the holes on the finger.
I recently bought a kind of beat pair of CLs from DField, I spent a few hours today making them workable.
BEFORE:
AFTER:
Just a bunch of sewing, cut up the palms of an old ass pair of Mission fuel 60's I had lying around and double layers them to patch it up, ran out of time otherwise I would have sewn up all the holes on the finger.
Phrasing people! Phrasing!!!
#2
Posted 17 June 2012 - 07:28 PM
Nice work! Wish I had a sewing machine I'd go to town on some of my stuff lol
NHL teams could care less that you want a pair of brand new Warrior Luxe/Franchise custom thumb loop super custom digi toilet paper soft palm with double added reinforced custom Warrior logo backhand padding gloves or a 17 flex double kreps curve upside down toe hook stick from your fav player/team. -Bakes
#3k
#5
Posted 18 June 2012 - 12:33 AM
It looks like he used a speedy stitcher. Just like this http://www.ebay.com/...#ht_1635wt_1166
It's Samsquamtch Ricky
#6
Posted 18 June 2012 - 03:28 AM
Thanks guys, but I just used a sharp needle and some thread, the only machine sewing is putting the two layers of usable palm together to make the patch, the rest is all by hand, its a pain in the ass to go through 4 layers of palm with just a needle...
Phrasing people! Phrasing!!!