38 replies to this topic

[firefighter55]

Anyone know how to remove the iron logos on a jersey and swap them on to different jersey with your ruining the emblem.

[Mdwsta4]

Engrish? Are you referring to the current Adidas practice jerseys? I’ve tried a number of methods and sought professional advice. So far, nothing works and no one has ideas. Only want to cover up the circular logo is to sew something large enough over it. That’s what I did for this jersey:

 

https://media.fotki....EY6pFnx1YqB.jpg

 

If you’re simply referring to an iron on patch, that should come off same as any other crest

[firefighter55]

Talking about the iron on ones

[firefighter55]

Nice hawks jersey by the way!

[Buzz_LightBeer]

https://www.primeadh...ABEgJS6vD_BwE#/

This stuff worked great for removing heat press letters and leaving very little adhesive.

[Mdwsta4]

https://www.primeadh...ABEgJS6vD_BwE#/

This stuff worked great for removing heat press letters and leaving very little adhesive.

Is that any different than straight acetone?

[Buzz_LightBeer]

I forget what the active chemical is, but you’d aerosolize it on the inside of the jersey and they’d peel right off.

[kevboy555]

I forget what the active chemical is, but you’d aerosolize it on the inside of the jersey and they’d peel right off.

Aerosolize? Like putting it in a spray bottle would work? I’m going tot be starting a project with some Adidas Practice Jerseys, and having the crests come off of the front of them would make the job infinitely easier....

[Buzz_LightBeer]

Correct. It worked with heat press, but I’ve never tried it with iron on. May work.

[firefighter55]

Engrish? Are you referring to the current Adidas practice jerseys? I’ve tried a number of methods and sought professional advice. So far, nothing works and no one has ideas. Only want to cover up the circular logo is to sew something large enough over it. That’s what I did for this jersey:

https://media.fotki....EY6pFnx1YqB.jpg

If you’re simply referring to an iron on patch, that should come off same as any other crest

Where did you find that winter classic logo? I’m thinking about doing the same thing?

[Mdwsta4]

I bought a retail jersey at a great price and stripped it. Sold the blank jersey so it only cost me about $40


https://i.imgur.com/ZmayS81.jpg

[firefighter55]

Has anyone else attempted the Adidas heat press front logo?

[kevboy555]

Has anyone else attempted the Adidas heat press front logo?

I just so happened to do a couple of them yesterday. Took only about 15 mins. Piece of cake. Acetone put into a spray bottle to the back of the crest from the inside of the jersey, and it just peeled right off.

https://flic.kr/p/2iH9NP1

[alereflammam]

I just so happened to do a couple of them yesterday. Took only about 15 mins. Piece of cake. Acetone put into a spray bottle to the back of the crest from the inside of the jersey, and it just peeled right off.

https://flic.kr/p/2iH9NP1

Holy shit you just saved me a ton of work. Thanks!

[firefighter55]

Gotcha that easy huh?

Got a question on sizing for the MIC ones. How do they fit with shoulders on? I have 3 RBK 2.0 in 56. One of them is tight the others are just fine. Then I have one in 58 that is perfect. Just wondering if I should go 56 or 58. Im 5 9 205lbs.

[alereflammam]

I just did it in 30 seconds. Easiest strip job I’ve ever done

If you do it make sure you wash the jersey right after so the acetone doesn’t ruin the jersey.

[kevboy555]

I just did it in 30 seconds. Easiest strip job I’ve ever done

If you do it make sure you wash the jersey right after so the acetone doesn’t ruin the jersey.

Yeah. Such an easy strip. I was doing mine to make a Canucks Grizzlies Warmup Jersey, and it turned out exactly how I had hoped it would.

https://flic.kr/p/2iHL2Nr

[Mdwsta4]

Damn that looks great!

[kevboy555]

Damn that looks great!

Not quite complete yet. I had Customize Sports do up a HUGHES kit for me in the Grizzlies font as well, so once that is on, it will look complete

[firefighter55]

What size did you go with?