Jump to content


Photo

CCM Pro Stock Shell


  • Please log in to reply
8 replies to this topic

#1 Grammer

Grammer
  • LocationVancouver, BC

Posted 28 February 2013 - 02:47 PM

I have a CCM shell that I got recently thinking it would fit. It did not. There are no tags inside, but it seemed to me to be about a M or L. As you can see the NHL shield is on the back right leg. I didn't put it there. I don't know who did, because as you can also probably see, those colours haven't really been used in the NHL - or not to my knowledge anyhow. Take it for what it's worth. Regardless of the NHL logo, it's not a retail shell and will look good on someone a bit bigger than me. 

 

12 3/4" is the leg opening, flat across

 

21" in the length from the absolute top to the absolute bottom, running down the middle between the two white stripes

 

$40 plus shipping obo.

 

IMG_0786_zpsb31d5cb7.jpg

 

IMG_0787_zps32e994fa.jpg

 

IMG_0789_zps8d692a97.jpg

 

IMG_0788_zps535e80e7.jpg



#2 JN26

JN26

Posted 28 February 2013 - 02:57 PM

Hello!

 

May be a dumb question but is it definitely a pant shell? I use a Bauer girdle and have been looking for girdle shells.



#3 Grammer

Grammer
  • LocationVancouver, BC

Posted 28 February 2013 - 03:27 PM

They're basically the same thing, my friend. I wear a girdle and I have pant and girdle shells. They'll both do the trick, my friend. 



#4 JN26

JN26

Posted 28 February 2013 - 03:57 PM

Really? I tried a few pant shells and they were huge in comparison to the girdle shells. Let me measure the dimensions of my shell and if it's close to yours then I'm very interested in getting this shell.

 

Medium CCM is about a 32-34 waist right?



#5 Grammer

Grammer
  • LocationVancouver, BC

Posted 28 February 2013 - 03:59 PM

Yeah. 



#6 waffle

waffle
  • LocationOrange County, California, USA

Posted 28 February 2013 - 05:57 PM

Looks like it might be more of a girdle shell based on the waste band(or maybe I'm talking out of my ass). Either way, it'll fit well.


You're gonna carry that weight...


#7 Grammer

Grammer
  • LocationVancouver, BC

Posted 03 March 2013 - 08:56 PM

B.U.M.P.



#8 JN26

JN26

Posted 08 March 2013 - 01:03 PM

Sorry Grammer I have been out of town for work. These will be two inches longer tha my current shell, width is fine though. Best of luck selling these.



#9 Grammer

Grammer
  • LocationVancouver, BC

Posted 11 March 2013 - 12:43 PM

Final bump. Any interest, act fast!