8 replies to this topic

[Liddy019]

Does anyone know what code is the closet on the pro stock sticks weight wise to the retail crazy light?

[KidCoyote]

FLEX PROFILE
* FUSE CONSTANT - Constant stiffness with a stiffer kick point.
* FUSE VARIABLE - Constant top half, stiffer mid section with a softer taper & kick point.
* SPEAR CONSTANT - Softer top, slightly stiffer mid section with a stiffer kick point. (Not Available in 'T' geometry)
* SPEAR VARIABLE - Constant top half, stiffer mid section with softer taper & kick point.
* SPEAR STRAIGHT - Constant stiffness from top to bottom. (Available in 'TR' geometry only)
* DUAL DENSITY - Constant top half with the siffest mid section, taper & kick point. (Same flex profile as SE16, 'TR' geometry only)
* TAPER LITE - Constant top half with a drastically softer taper & kick point. (Same flex profile as S19, 'TR' geometry only)
* HD - Heavy Duty

From PSHG's custom U+ CL page

http://www.prostockh...s-min-of-6.html

[KidCoyote]

Sorry, didnt read your question right.

These are the weights though

STICK WEIGHT
* ULTRA LITE - 420 - 430 gr
* LITE - 460 - 457 gr
* HD - 480 - 500 gr

[Liddy019]

So SCL=spear constant lite? What would the lettering be for the utra lite?

[PSHG_Pro Stock]

So SCL=spear constant lite? What would the lettering be for the utra lite?

SCU

[malcb33]

I'm looking at picking up a few CCM tapered shafts and they have this code on them: 10H-FTC-SHPLUS-CST01310A. Any idea what flex profile these might be?

[Bardownhockey8]

I heard FV is similar to the Bauer G3 construction but idk never used a pro stock ccm only warrior bauer and eastons