4 replies to this topic

[ken6473]

Curious as to what the SV stands for on my 11K. I'm also looking to see what is different between all the stick codes.

[avalanche19]

I believe that means that is it a ccm stick but i could be totally wrong

[PSHG_Pro Stock]

Curious as to what the SV stands for on my 11K. I'm also looking to see what is different between all the stick codes.

Spear Variable

STICK CONSTRUCTIONS
* FUSE - Molded blade in shaft
* SPEAR - Blade molded over both sides of shaft

STICK WEIGHT
* ULTRA LITE - 420 - 430 gr
* LITE - 460 - 457 gr
* HD - 480 - 500 gr

BLADE THICKNESS
* 07 - Standard
* 08 - Thinner
* HD - Heavy Duty

FLEX PROFILE
* FUSE CONSTANT - Constant stiffness with a stiffer kick point.
* FUSE VARIABLE - Constant top half, stiffer mid section with a softer taper & kick point.
* SPEAR CONSTANT - Softer top, slightly stiffer mid section with a stiffer kick point. (Not Available in 'T' geometry)
* SPEAR VARIABLE - Constant top half, stiffer mid section with softer taper & kick point.
* SPEAR STRAIGHT - Constant stiffness from top to bottom. (Available in 'TR' geometry only)
* DUAL DENSITY - Constant top half with the siffest mid section, taper & kick point. (Same flex profile as SE16, 'TR' geometry only)
* TAPER LITE - Constant top half with a drastically softer taper & kick point. (Same flex profile as S19, 'TR' geometry only)

[avalanche19]

lol see I was toally wrong

[ken6473]

Thanks for the quick reply PSHG! Exactly what I was looking for!