Pro Stock 11K Stick Codes
Started by ken6473, Mar 28 2012 01:34 PM
4 replies to this topic
#3
Posted 28 March 2012 - 01:37 PM
Spear VariableCurious as to what the SV stands for on my 11K. I'm also looking to see what is different between all the stick codes.
STICK CONSTRUCTIONS
* FUSE - Molded blade in shaft
* SPEAR - Blade molded over both sides of shaft
STICK WEIGHT
* ULTRA LITE - 420 - 430 gr
* LITE - 460 - 457 gr
* HD - 480 - 500 gr
BLADE THICKNESS
* 07 - Standard
* 08 - Thinner
* HD - Heavy Duty
FLEX PROFILE
* FUSE CONSTANT - Constant stiffness with a stiffer kick point.
* FUSE VARIABLE - Constant top half, stiffer mid section with a softer taper & kick point.
* SPEAR CONSTANT - Softer top, slightly stiffer mid section with a stiffer kick point. (Not Available in 'T' geometry)
* SPEAR VARIABLE - Constant top half, stiffer mid section with softer taper & kick point.
* SPEAR STRAIGHT - Constant stiffness from top to bottom. (Available in 'TR' geometry only)
* DUAL DENSITY - Constant top half with the siffest mid section, taper & kick point. (Same flex profile as SE16, 'TR' geometry only)
* TAPER LITE - Constant top half with a drastically softer taper & kick point. (Same flex profile as S19, 'TR' geometry only)