Jersey Front Emblem removal
#2
Posted 07 March 2020 - 11:37 PM
Engrish? Are you referring to the current Adidas practice jerseys? I’ve tried a number of methods and sought professional advice. So far, nothing works and no one has ideas. Only want to cover up the circular logo is to sew something large enough over it. That’s what I did for this jersey:
https://media.fotki....EY6pFnx1YqB.jpg
If you’re simply referring to an iron on patch, that should come off same as any other crest
#5
Posted 08 March 2020 - 09:47 AM
This stuff worked great for removing heat press letters and leaving very little adhesive.
Good Idea; Whistling while you work.
Bad Idea; Whistling while you eat.
#6
Posted 08 March 2020 - 10:17 AM
https://www.primeadh...ABEgJS6vD_BwE#/
This stuff worked great for removing heat press letters and leaving very little adhesive.
Is that any different than straight acetone?
#8
Posted 09 March 2020 - 09:05 PM
I forget what the active chemical is, but you’d aerosolize it on the inside of the jersey and they’d peel right off.
Aerosolize? Like putting it in a spray bottle would work? I’m going tot be starting a project with some Adidas Practice Jerseys, and having the crests come off of the front of them would make the job infinitely easier....
#10
Posted 12 March 2020 - 10:14 AM
Engrish? Are you referring to the current Adidas practice jerseys? I’ve tried a number of methods and sought professional advice. So far, nothing works and no one has ideas. Only want to cover up the circular logo is to sew something large enough over it. That’s what I did for this jersey:
https://media.fotki....EY6pFnx1YqB.jpg
If you’re simply referring to an iron on patch, that should come off same as any other crest
Where did you find that winter classic logo? I’m thinking about doing the same thing?
Blackhawks Hawks HGTK 14” Gloves
#11
Posted 12 March 2020 - 03:56 PM
https://i.imgur.com/ZmayS81.jpg
#13
Posted 25 March 2020 - 09:40 AM
Has anyone else attempted the Adidas heat press front logo?
I just so happened to do a couple of them yesterday. Took only about 15 mins. Piece of cake. Acetone put into a spray bottle to the back of the crest from the inside of the jersey, and it just peeled right off.
https://flic.kr/p/2iH9NP1
#14
Posted 25 March 2020 - 04:37 PM
I just so happened to do a couple of them yesterday. Took only about 15 mins. Piece of cake. Acetone put into a spray bottle to the back of the crest from the inside of the jersey, and it just peeled right off.
https://flic.kr/p/2iH9NP1
Holy shit you just saved me a ton of work. Thanks!
#15
Posted 25 March 2020 - 04:40 PM
Got a question on sizing for the MIC ones. How do they fit with shoulders on? I have 3 RBK 2.0 in 56. One of them is tight the others are just fine. Then I have one in 58 that is perfect. Just wondering if I should go 56 or 58. Im 5 9 205lbs.
Blackhawks Hawks HGTK 14” Gloves
#17
Posted 25 March 2020 - 08:52 PM
I just did it in 30 seconds. Easiest strip job I’ve ever done
If you do it make sure you wash the jersey right after so the acetone doesn’t ruin the jersey.
Yeah. Such an easy strip. I was doing mine to make a Canucks Grizzlies Warmup Jersey, and it turned out exactly how I had hoped it would.
https://flic.kr/p/2iHL2Nr