788 replies to this topic

[KidCoyote]

CCM finger length is pretty consistent across the board but the CL500 will fit tighter than the CL because the CL tapers out towards the cuff quite a bit more than the CL500 that has a more consistent fit.

[Golden Gate Sharpening]

Sorry for getting you addicted to 13" Crazy Lights 

 

In my experience, 14" CL500's fit somewhere in between 13" and 14" CL's. They are definitely snugger in the palm and wrist. 

[xstartxtodayx]

CCM finger length is pretty consistent across the board but the CL500 will fit tighter than the CL because the CL tapers out towards the cuff quite a bit more than the CL500 that has a more consistent fit.

 

 

Thanks... I think I might give some CL500's a try.

 

Sorry for getting you addicted to 13" Crazy Lights 

 

In my experience, 14" CL500's fit somewhere in between 13" and 14" CL's. They are definitely snugger in the palm and wrist. 

 

haha, they were my gateway drug.  I really do love them, thanks again!

[gillsley]

First I want to say I hate you guys, you've fueled an unnecessary desire for more CCM gloves than I knew existed.

With that being said... I have a pair of 13" CL's I picked up from jake91 a few months ago and absolutely love them. I was unsure about the 13" size since I normally wear 14" in other gloves but after comparing to my 14" 4R Pro's I found they're nearly identical in size (just snugger inside with the padding where the 4R Pro's are a touch roomier). I found a pair of 14" CL's on ebay and right away realized I like the 13" fit better, the 14" feels huge compared to the 13" CL and the 14" 4R (also the pinky on my top hand was super uncomfortable when I bent it which, after reading 33 pages here today, found a few others felt the same way).

So now my question: I'm looking for a blue pair of gloves (Leafs or Lightning), and found a 14" pair of CL500/HG50's, I read these are slightly more tapered than the CL's, is that true? Would a 14" CL500 fit smaller than a 14" CL? I have had no luck finding a CL500 in 13" so I'm considering the 14".

Thanks in advance, and when I said I hate you guys I really meant I love you guys

I have a pair of 14inch Marlies HG50s for sale. PM me if you’re still looking for a pair

[gillsley]

First I want to say I hate you guys, you've fueled an unnecessary desire for more CCM gloves than I knew existed.

With that being said... I have a pair of 13" CL's I picked up from jake91 a few months ago and absolutely love them. I was unsure about the 13" size since I normally wear 14" in other gloves but after comparing to my 14" 4R Pro's I found they're nearly identical in size (just snugger inside with the padding where the 4R Pro's are a touch roomier). I found a pair of 14" CL's on ebay and right away realized I like the 13" fit better, the 14" feels huge compared to the 13" CL and the 14" 4R (also the pinky on my top hand was super uncomfortable when I bent it which, after reading 33 pages here today, found a few others felt the same way).

So now my question: I'm looking for a blue pair of gloves (Leafs or Lightning), and found a 14" pair of CL500/HG50's, I read these are slightly more tapered than the CL's, is that true? Would a 14" CL500 fit smaller than a 14" CL? I have had no luck finding a CL500 in 13" so I'm considering the 14".

Thanks in advance, and when I said I hate you guys I really meant I love you guys

I have a pair of 14inch Marlies HG50s for sale. PM me if you’re still looking for a pair

[JoeyJ0506]

A BIG thank you to Louie and Baker for helping me pick these up:

 

 

[Dupes]

NIce! #Kingof852

[blazer88]

Hey Guys, have my eyes on a pair of HG 97XP'S, would anyone know if they have the D30 foam & if they have a very loose fit ( pair I'm looking at is standard width ). Thanks

[Kevin52597]

The XP models have D30 foam. I personally feel like hg97 fits more snug than a nexus, but still has a traditional feel

[90Style10Skill]

The XP models have D30 foam. I personally feel like hg97 fits more snug than a nexus, but still has a traditional feel

Would you say the HG97s fit as snug as their retail counterpart? Or slightly looser?

[bluelinebully]

I have a pair of 15” retail and 14” PS, fit is very similar imo.

[kongking93]

Probably the better thread to try this on....

I'm a huge fan of the 852s. I've owned a pair of Hagelin ones and, while they're 14", they feel pretty narrow and closer to 13" (which are my size in other models). I recently picked up a TJ Brennan pair of 852s on eBay, but they feel like actual 14s; fingers feel a bit longer and looser.

So question is, does Hagelin have smaller palms/gussets put on them? What kind of palms does he have to begin with? Trying to gauge all these so that if I do decide to send the Brennan gloves to fix the hole in the palm, I can get it back closer fitting to the Hags pair. Thanks guys

[blazer88]

Just picked up these pro stock HG QL'S, Oiler 3 rd's. full poly inserts , nice tight fit. really like, have a pair of Tampa bay 3 rd's on the way

[NovaHands]

I'm all about that poly insert life.

[blazer88]

I'm all about that poly insert life.

I just can't use gloves without inserts !

[Dupes]

NIce gloves. I wish the Oilers used that colorway this year instead of the navy.

[blazer88]

Thanks Dupes, yes that shade of blue with just the orange branding looks awesome. also the quicklites are a very protective / great feeling glove. Ccm did a great job with this model.

[RakCity67]

How do the QLs fit compared to an APX pro? Wondering if the QLs or Tacks fit more similar to the APX as it's my favorite glove of all time. Really want to try a CCM pro glove but just haven't had the chance to try on pro stock tacks or QL 

[louie]

QLs are very tight. I think a 13” APX 2 is loose, the QLs almost feel too small in a 13”.

[blazer88]

Liked the Oiler Quick lites so much , got a pair of Tampa Bay 3rd'd too. Great gloves. posted 9 more pictures in gallery                                                                                                    t